Hubbardton-forge 307920 Manuale Utente Scaricare il pdf

Installation Instructions B146

Airis Sconce 30-7920 Page 1 of 3

Hand-Forged, Vermont-Made Lighting and Accessories

154 Route 30 South, Castleton, Vermont 05735

21272 Rev E

To Install Fixture (Figures 1 & 2)

Component Parts

A Crossbar

B 8-32 x 1” Screw

C Fixture

D 8-32 x 3/8” Screw (2)

E Mounting Bracket

F #10 x 1” Screws (2)

G Caulking Lip

H Screw

Caution: Be sure power is off at the main breaker box prior to installation.

1. Carefully unpack the fixture from the carton.

2. Using two machine screws (not provided) attach crossbar (A) to the electric

box.

Note: A new electric box comes with screws. When replacing a fixture,

retain the screws for use with the new fixture

3. From center hole of crossbar measure down 18-9/16" and mark location for

first hole for wall mounting bracket (E). Be sure hole location is vertical to

center hole of crossbar (A).

4. Hold mounting bracket (E) so hole matches location marked previously

and mark bottom hole location.

5. Attach mounting bracket (E) using #10 x 1" screws (F).

6. Loosen screws (D) so they do not protrude through edge of mounting bracket (E)

at this time.

Note: Screws are shipped installed in bracket.

7. Install screw (H) in tab on bottom of fixture (C). Screw should only be installed a

couple of turns at this time (Figure 2).

8. Using suitable wire connectors (not provided), connect the fixture wires to the

supply wires, (white to white, white to black, bare copper or green to bare copper

or green).

Caution: Make sure wire connectors are twisted on securely and no bare wires

are exposed.

9. Apply a generous bead of a suitable caulking material to caulking lip (G) on the

fixture (Figure 2).

10. Carefully tuck all wires behind the fixture, align bottom of fixture with mounting

bracket (E), place fixture firmly against the wall and fasten with 8-32 x 1" screw

(B). To ensure a water tight seal, apply a thin bead of caulking around entire

perimeter of the fixture.

11. Tighten screw (D) on both sides of mounting bracket (E) until snug against

fixture.

12. Install light bulb (not provided).

13. See installation instructions following for option purchased.

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 2)

(Figure 1)

1 2 3

B146 1
21272 Rev E 1

Sommario

Pagina 1 - 21272 Rev E

Installation Instructions B146 Airis Sconce 30-7920 Page 1 of 3 Hand-Forged, Vermont-Made Lighting and Accessories 154 Route 30 South, Castlet

Pagina 2

Installation Instructions B146 Airis Sconce 30-7920 Page 2 of 3 Hand-Forged, Vermont-Made Lighting and Accessories 154 Route 30 South, Castlet

Pagina 3

Installation Instructions B146 Airis Sconce 30-7920 Page 3 of 3 Hand-Forged, Vermont-Made Lighting and Accessories 154 Route 30 South, Castlet

Commenti su questo manuale

Nessun commento

Hubbardton-forge 307920 Manuale Utente

Navigare online o scaricare Manuale Utente per Illuminazione Hubbardton-forge 307920. Hubbardton Forge 307920 User Manual Manuale Utente

Sommario

Commenti su questo manuale

Prodotti e manuali riguardandi Illuminazione Hubbardton-forge 307920